Jiangsu tile adhesive bonding strength - H & Q tile adhesives Paving tile construction technology 
 Tile adhesives, also known as tile adhesives, tile adhesives, general type, polymers, heavy brick, H & Q's newly developed products, mainly used to paste the tiles, tiles, floor tiles and other decorative materials, widely used in interior and exterior the ground surface, bathroom, kitchen and other building finishes decorative places. Its main characteristic is the high bond strength, water resistance, freeze-thaw resistance, aging resistance and easy construction, is an ideal bonding material. 
 Construction Technology: 
 ????? Use tile adhesives Paving tiles, available traditional point paste method, is about to glue applied to the tile on the back of the mixing well, then paste it above the substrate, but we recommend to use the scraper law, specifically as follows:????? a tooth scraper glue applied on top of the face, so that the uniformly distributed, and a section of the dentate. Each coating about 1 square meter (depending on the weather temperature) and then airing the tile rubbing pressure on to;?????, Select the tooth scraper size should consider the formation of the face degree and tile back of the bump;?????, such as ceramic tile on the back of a deep fissure or stone, tile larger and heavier, you should double-sided adhesive, that is coated with ceramic tile ceramic tile on the back of the work bulletin binder;????? 4, the paving is completed, subject to the glue is completely dry (about 24 hours) before the next caulk;?????? adjustment: tile adhesive The agent has a good anti-hanging, does not appear to fall phenomenon. Paving tiles within 15 minutes after the adjustable tile spacing, can also be cross-clamp fixed distance. Surface treatment:????? 1, all surfaces should be firm, dry, clean, no shaking, no oil, wax stains, concrete curing agents and other loose material;?? Painted surface should be rough cut, or at least exposed to 80 % of the original surface;????? 2, after the completion of the concrete surface, the required conservation of six weeks before paving;? new plaster surface should be at least the conservation seven days before paving;?????, the old surface of concrete and plaster can be used industrial detergent or degreaser clean, then rinse with water cannons. Surface to dry for 24 hours before paving;?????, Remove the concrete surface, in particular, the residual release agent on the sloping concrete flat slab;????? 5, the substrate loose and absorbent strong or surface dust, dirt difficult to clean thoroughly, can be coated with a four-in-one flexible oil additives to the surface will help the tile adhesive bonding. 
 Corporate Web site: 
 http://www.sdhanding.com/ 
 Contact: 
 0533-6077739 
 18678198617